EMX Two Channel Multi-Voltage Vehicle Loop Detector EU Wiring | EMX-ULT-MVP-2E
The ULTRALOOP® two-channel multi-voltage vehicle loop detector combines small
size with a 12VDC to 240VAC input range.
The ULT-MVP-2 provides relay contact outputs indicating vehicle presence, pulse, AB logic (directional mode), or the new EMX feature, Detect-On-Stop™ (DOS®) for each channel. The ULT-MVP-2 features automatic sensitivity boost (ASB) and infinite or normal (5 min.) presence.
The detector is easily installed and has user-friendly features that simplify set-up, operation, and troubleshooting. Sensitivity selection is simplified by the ULTRAMETER™ display that indicates the appropriate sensitivity setting with the vehicle positioned on the loop. The 10 sensitivity settings allow for finer adjustment of the detection level, while the 4 frequency selections provide greater flexibility in preventing crosstalk in multi-loop applications.
Features
- Presence/pulse output
- AB logic
- Detect-On-Stop
- ABS
- Normal/infinite presence
Connections
- Power: 1
- Power: 2
- Channel 1 loop: 3
- Channel 1 loop: 4
- Channel 2 loop: 5
- Channel 2 loop: 6
- Channel 2 NO contact: 7
- Channel 2 common contact: 8
- Ground: 9
- Channel 1 NO contact: 10
- Channel 1 common contact: 11
Manufacturer’s Warranty
- 2 Years
Technical Specifications
- Sensitivity: 10 levels, 0-9
- ULTRAMETER™ Display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
- Loop Frequency: 4 settings (low, med-low, med-hi, high)
- Loop Inductance: 20…2000µH (Q factor > 5)
- Grounded Loop: Isolation transformer allows operation with poor quality loops
- Automatic Tuning: Detector tunes to loop on power-up and following frequency count function
- Environmental Tracking: Automatic compensation
- Surge Protection: Loop circuitry protected by surge suppressors
- Presence Relay: Loop circuitry protected by surge suppressors
- Output B Relay: SPST relay contact (form A)
- Contact Ratings: 1A @ 24VDC…120VAC
- Power / Loop Fault Indicator: Green LED
- Detect / Frequency Count Indicator: Red LED
- Detect-On-Stop™: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
- ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
- Power: 12VDC…24VDC, 24VAC
- Operating Current: 15mA standby / 45mA detect
- Operating Temperature: -40˚C…82˚C (-40˚F…180˚F) 0…95% relative humidity
- Dimensions (L x W x H): 73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
- Weight: 0.25 lbs. (113 g)
- Housing: ABS plastic, IP30
- Connections: Socket mount – 11 pin male (JEDEC B11-88)
Videos
